Generator Maintenance
Generator Maintenance preventative maintenance plans include the following:





- Check all filters (oil, fuel, and air)
- Check lubricating oil
- Check air inlets and outlets for debris
- Check battery electrolyte level
- Check and record battery voltage
- Check and record battery amperage
- Check battery connection terminals and clean as necessary
- Clean battery posts and terminals
- Check battery charger and adjust float rate (if necessary)
- Check crankcase oil level
- Check crankcase blowby
- Visual inspection of front and rear crankshaft seals and lubrication system gaskets
- Check coolant level
- Visual inspection of radiator/heat exchanger
- Inspect radiator cap, gaskets and sealing surfaces
- Visually inspect engine coolant
- Visually inspect water pump and cooling system gaskets
- Inspect engine belts
- Check jacket water heaters
- Check and adjust belt tension
- Inspect hoses
- Check and record engine coolant antifreeze protection
- Check exhaust system, engine mounts and control panel
- Check generator and voltage regulator
- Complete operational checks as per factory specs
- Conduct visual on-site inspections of the generators and tanks
- Oil, filter, change
- Battery change out
- Load bank testing
- Diesel Fuel Testing
- Diesel Fuel Polishing